Light Towers

Stadium Light Towers | Confined Space Lighting | Temp Power GFCI

The Rental Authority

UL Certified | Code Compliant

Portable Lighting & Job Site Electrical Distribution

UL Standards 844, 153 & 1640

BossLTR Rental Products

RENTAL Jobsite Portable Power Distribution Substations – 480V to 120/240v, GFCI

  • PORTABLE SPIDER ELECTRICAL GROUND FAULT BOX. 6 x 120v GFCI duplex outlets
PORTABLE SPIDER ELECTRICAL GROUND FAULT BOX. 6 x 120v GFCI duplex outlets

Rental Rates

PORTABLE SPIDER ELECTRICAL GROUND FAULT BOX can be assembled 120/240v, 1ph or 208y/120v, 3ph line voltage.  Six 20 amp, 120v GFCI Duplex WR rated receptacles approved by UL>

Model # SB106GFI

The PORTABLE SPIDER ELECTRICAL GROUND FAULT BOX has 50 amp, 125 volt 3p/4w plug and connector for feed though operations.  System comes with six 20 amp, 120v GFCI WR rated outlets with In-use weather proof covers.  Each receptacle is protected by a 20 amp push-button circuit breaker.  The line input feed has phase lock out protection required by UL.  Green Indication light to advise operators that power is ON at system.  The PORTABLE SPIDER ELECTRICAL GROUND FAULT BOX Product is assembled within a Nema 4 Plastic enclosure mounted on a floor frame.

Boss is a UL1640 Certified Temporary Job-site Electrical Distribution Assembler.  The products we assemble are accepted by all Federal Construction Projects monitored by OHSA.  Our units are serialized so that on-site inspectors can validate Boss products directly with Underwriter’s on-line validation services.

LIABILITY NOTICE:  UL1640 Standard was established by OHSA to ensure users that the Temp Power products used on construction sites were assembled in accordance to NATIONAL ELECTRICAL STANDARDS.  The UL1640 is the Standard for Portable Job-site Distribution Products.  Just because an assembler may have an electrical engineering degree or be a certified electrical contractor and using all UL Certified Electrical components this does not validate them to produce Portable Job-site Distribution Products.  To be recognized by OHSA an assembler must be registered with Underwriter’s Lab as a member in good standings.  Good Standings means paying dues to UL every quarter and being monitored by a UL Field Representative every quarter reporting all UL Projects performed and verified by UL Serial Number tag registered with Underwriter’s Lab.

                         Ignorance of UL Safety Standards is no excuse for Non-compliance by Owners.

 


  • PORTABLE 75KVA DISTRIBUTION-SUBSTATION 480V 125V-250 VOLT WP CONNECTORS.  8 – 125/250v 50amp Twist Lock connectors
PORTABLE 75KVA DISTRIBUTION-SUBSTATION 480V 125V-250 VOLT WP CONNECTORS. 8 – 125/250v 50amp Twist Lock connectors

Rental Rates

PORTABLE 75KVA DISTRIBUTION-SUBSTATION 480V 125V-250 VOLT WP CONNECTORS

The Boss PORTABLE 75KVA DISTRIBUTION-SUBSTATION 480V 125V-250 VOLT WP CONNECTORS is attached to a steel four wheel cart with conductive caster wheels.   Balance to where the system can be moved around by forklift or rolled around on casters. Installed is a 75kva, 480v 3ph to 120/240v secondary with sized load center to install a minimum of eight 50 amp, 125/250v Spider/California connectors.  Connectors will be protected by 50a, 240v 2p circuit breakers within a Nema 3R Enclosure.

The PORTABLE 75KVA DISTRIBUTION-SUBSTATION 480V 125V-250 VOLT WP CONNECTORS is painted Safety YELLOW.

For this product PORTABLE 75KVA DISTRIBUTION-SUBSTATION 480V 125V-250 VOLT WP CONNECTORS can be supply Square D or General Electric Gear depending on clients preferred Brand.  Stab on or bolt on breakers clients choice. Wiring devices can be supplied using Daniel Woodhead, Ericson or Hubbell. Each connector is wired to a 3′ cord from breaker box.  This makes it easier for tech to plug and unplug from substations.

With advance notice Bossltr can assemble special required substations to meet clients specific connector needs.  We ask that you give us 14 day notice on any special built projects.

Bossltr can assembler substations using 480 volt line power.  We can add switchgear with fused disconnects or individual single breaker wiring outlets.  We can supply both 480v, 3ph or 208y/120v, 3ph substations with transformers to allow for a bank of 120v or 240v GFCI receptacles sized to transformer load capacities, or, we can use GFI breakers with water proof connectors twist lock or straight blade design.

Boss is a UL1640 Certified Temporary Job-site Electrical Distribution Assembler.  The products we assemble are accepted by all Federal Construction Projects monitored by OHSA.  Our units are serialized so that on-site inspectors can validate Boss products directly with Underwriter’s on-line validation  services.

LIABILITY NOTICE:  UL1640 Standard was established by OHSA to ensure users that the Temp Power products used on construction sites were assembled in accordance to NATIONAL ELECTRICAL STANDARDS.  The UL1640 is the Standard for Portable Job-site Distribution Products.  Just because an assembler may have an electrical engineering degree or be a certified electrical contractor and using all UL Certified Electrical components this does not validate them to produce Portable Job-site Distribution Products.  To be recognized by OHSA an assembler must be registered with Underwriter’s Lab as a member in good standings.  Good Standings means paying dues to UL every quarter and being monitored by a UL Field Representative every quarter reporting all UL Projects performed and verified by UL Serial Number tag registered with Underwriter’s Lab.

                         Ignorance of UL Safety Standards is no excuse for Non-compliance by Owners.


  • PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION.  25kva Transformer 4 x 1000w Floodlights
PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION. 25kva Transformer 4 x 1000w Floodlights

Rental Rates

PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION

The Boss PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION is attached to a steel skid frame.  Balance to where the system can be moved around by forklift or by dual lifting eyes.

The PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION are painted Safety Red.

For this product PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION can be supply Square Dare D or General Electric Gear depending on clients preferred Brand.  Stab on or bolt on breakers clients choice. Wiring devices can be supplied using Appleton, Killark, Crouse Hinds, or Hubbell.

The PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION light tower is supplied with 4 x 300w LED Floodlights mounted on a 8 foot telescoping tower.  Lights can be positioned to project 360 degree beam spread.  Project light 100 feet from light source.

With advance notice Bossltr can assemble special required light tower substations to meet clients specific need.  We ask that you give us 14 day notice on any special built projects.

SPECIAL LIGHT TOWER -SUBSTATION RENTAL PRODUCTS UPON REQUEST.

Bossltr can assembler LIGHT TOWER substations using only 480 volt line power.  We can add welding switchgear with fused disconnects or individual single breaker wiring outlets.  We can supply both 480v, 3ph or 208y/120v, 3ph substations with transformers to allow for a bank of 120v or 240v GFCI receptions sized to transformer load capacities, or, we can use GFI breakers with WR duplex outlets as many has client request.

Boss is a UL1640 Certified Temporary Job-site Electrical Distribution Assembler.  The products we assemble are accepted by all Federal Construction Projects monitored by OHSA.  Our units are serialized so that on-site inspectors can validate Boss products directly with Underwriter’s on-line validation  services.

 

 

 

 

 

 

 


  • PORTABLE WELDING MACHINE POWER PANELS 480V.  Model# WP400/8C/480-120V
PORTABLE WELDING MACHINE POWER PANELS 480V. Model# WP400/8C/480-120V

Rental Rates

PORTABLE WELDING MACHINE POWER PANELS 480V

Our PORTABLE WELDING MACHINE POWER PANELS 480V are assembled to UL1640 and NEC National wiring Standards.  This welding panel has eight 60a or 100 amp pin & sleeve receptacles mounted on a Nema 4/12 enclosure wired to rated 480v 3p Circuit breakers installed within a 400 amp load center, Main Circuit Breaker protected.   The Load Center is rated Nema 3R for outdoor use.  System has a GREEN 480v pilot light to advise operators on site that power is live at panel.  400a Camloc feed line voltage.

The Boss PORTABLE WELDING MACHINE POWER PANELS 480V Load Center is attached to a steel skid frame.  Balance to where the system can be moved around by forklift or by dual lifting eyes.

480 volt Welding Panels are painted Safety Red.

For this product PORTABLE WELDING MACHINE POWER PANELS 480V can supply Square D I-line Gear or General Electric Gear depending on clients preferred Brand.  Stab on or bolt on breakers clients choice. Wiring devices can be supplied using Appleton, Killark, Crouse Hinds, or Hubbell.

With advance notice Bossltr can assemble special required welding panels to meet clients specific need.  We ask that you give us 14 day notice on any special built projects.

SPECIAL WELDING PANEL RENTAL PRODUCTS UPON REQUEST.

Bossltr can assembler WELDING PANEL substations using only 480 volt line power.  We can add welding switchgear with fused disconnects or individual single breaker wiring outlets.  We can supply both 480v, 3ph or 208y/120v, 3ph substations with transformers to allow for a bank of 120v or 240v GFCI receptions sized to transformer load capacities, or, we can use GFI breakers with WR duplex outlets as many has client request.

Boss is a UL1640 Certified Temporary Job-site Electrical Distribution Assembler.  The products we assemble are accepted by all Federal Construction Projects monitored by OHSA.  Our units are serialized so that on-site inspectors can validate Boss products directly with Underwriter’s on-line validation  services.

 


  • PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE .  480v or 208y/120v, Camloc / Pin & Sleeve Connectors
PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE . 480v or 208y/120v, Camloc / Pin & Sleeve Connectors

Rental Rates

PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE

PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE…NOTICE:  Boss is a UL1640 Temporary Job-site Electrical Distribution Assembler. We can assemble rental products to meet our clients specific job requirements.  The following model # Splitter panel can be modified using clients required amp rating of panel and the individual wiring devices needed for applications.

Model# SP600/6C/100A-480V CART

Our PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE  are assembled to UL1640 and NEC National wiring Standards.  This splitter panel has six 100 amp pin & sleeve receptacles mounted on a Nema 3R enclosure wired to six 100 amp 480v 3p Circuit breakers installed within a 600 amp load center, MLO. The Load Center is rated Nema 3R for outdoor use.  System has a GREEN 480v pilot light to advise operators on site that power is live at panel.

The Boss PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE Load Center is attached to a two wheel ( conductive ) steel cart.  Balance to where the system can be moved around hard services.  This load center is protected from rain with a UL required bonnet.  Bonnet is installed so falling rain cannot directly be exposed to opened circuit panel door.

480 volt Splitter Panels are painted Safety Red.  208Y/120v, 3ph panels are painted Safety Blue, and, 120/240v, 1ph panels are painted white.

For this product PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE  can supply Square D I-line Gear or General Electric Gear depending on clients preferred Brand.  Stab on or bolt on breakers clients choice. Wiring devices can be supplied using Appleton, Killark, Crouse Hinds, or Hubbell.

With advance notice Bossltr can assemble special required Splitter panels to meet clients specific need.  We ask that you give us 14 day notice on any special built projects.

SPECIAL RENTAL PRODUCTS UPON REQUEST.

Bossltr can assembler Transformer substations using only 480 volt line power.  We can add welding switchgear with fused disconnects or individual single breaker wiring outlets.  We can supply both 480v, 3ph or 208y/120v, 3ph substations with transformers to allow for a bank of 120v or 240v GFCI receptions sized to transformer load capacities, or, we can use GFI breakers with WR duplex outlets as many has client request.

 

 


  • 10KVA TEMPORARY JOB-SITE DISTRIBUTION. UL1640 CERTIFIED- TDS10/10C/480-120V/240V 10kva Transformer, 480v to 120v GFCI -240v Twistlock.  Rental Rate: $650.00 per month,  Request Quote for Discount
10KVA TEMPORARY JOB-SITE DISTRIBUTION. UL1640 CERTIFIED- TDS10/10C/480-120V/240V 10kva Transformer, 480v to 120v GFCI -240v Twistlock. Rental Rate: $650.00 per month, Request Quote for Discount

Rental Rates

10KVA TEMPORARY JOB-SITE DISTRIBUTION.  UL Certified 10kva Temporary Power Station

10KVA TEMPORARY JOB-SITE DISTRIBUTION with a 10kva Transformer, 480v to 120/240v, with 125 amp load center protecting 8-20 amp, 120v, GFCI duplex receptacles and 2-30amp, 240v twist lock receptacles.   Package mounted on a skid design with forklift pockets to position unit throughout project site.

This unit is designed for rental applications. Temporary Power Station 480v- 120/240v sized to be easy to position on job-site.
Perfect for welding working areas, carpentry work, piping connections, electrical assembly areas, and lunch/break areas for personnel.

Model# TDS10/10C/480V-12o/240v compact power GFCI station.

Bossltg is a UL Certified Temporary Job-site Electrical Distribution Assembler.  We are registered with Underwriter’s Lab as a 3rd party certification facility for Bossltg product that include explosion proof portable lighting product.  Clients can call Boss for UL Standard information that will apply to portable rental applications.

Bossltg builds Temp Power distribution products using up to 113.5kva Transformers with 1200 amp switch gear.  We can assemble to meet engineered electrical temp power portable requirements.  Boss assembles Square D  I-Line panels up to 1200 amp, 480 volt and can UL certify with tracking serialized name plates.  Applications include Welding machine portable power outlet panels, transformer substations, office and work trailer complex electrical power utility hook-up stations, Splitter panels,  HVAC power stations, all to meet UL1640 portable standards. 10KVA TEMPORARY JOB-SITE DISTRIBUTION is one of the smallest that Boss assembles for special application used for trade shows and temporary housing requirements.  These temp power stations can be assembled on skid bases, rolling carts, and towable trailers.  We offer accessories that include light tower packages with LED floodlights, stainless steel assemblies for offshore saltwater apps, and Explosion Proof / Division 2 rated systems all UL1640 Certified.

Click Spec Sheets for full photo and description


  • 50KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION.RNT: TPD-TDS50/18C/480V-120V CR-GFCI: 50kva Transformer, 480v to 120v, GFCI duplex & California Style Outlets, Skid or Trailer Mounted
50KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION.RNT: TPD-TDS50/18C/480V-120V CR-GFCI: 50kva Transformer, 480v to 120v, GFCI duplex & California Style Outlets, Skid or Trailer Mounted

Rental Rates

50KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION  UL Certified 50kva Temporary Power Station

50KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION. This unit is designed for rental applications. Temporary Power Station 480v- 120/240v sized to be easily position on job-site.
50KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION is Perfect for welding working areas, carpentry work, piping connections, electrical assembly areas, and lunch/break areas for personnel.

Bossltg is a UL Certified Temporary Job-site Electrical Distribution Assembler.  We are registered with Underwriter’s Lab as a 3rd party certification facility for Bossltg product that include explosion proof portable lighting product.  Clients can call Boss for UL Standard information that will apply to portable rental applications.

Bossltg builds Temp Power distribution products using up to 113.5kva Transformers with 1200 amp switch gear.  We can assemble to meet engineered electrical temp power portable requirements.  Boss assembles Square D  I-Line panels up to 1200 amp, 480 volt and can UL certify with tracking serialized name plates.  Applications include Welding machine portable power outlet panels, transformer substations, office and work trailer complex electrical power utility hook-up stations, Splitter panels,  HVAC power stations, all to meet UL1640 portable standards. 10KVA TEMPORARY JOB-SITE DISTRIBUTION is one of the smallest that Boss assembles for special application used for trade shows and temporary housing requirements.  These temp power stations can be assembled on skid bases, rolling carts, and towable trailers.  We offer accessories that include light tower packages with LED floodlights, stainless steel assemblies for offshore saltwater apps, and Explosion Proof / Division 2 rated systems all UL1640 Certified.

50KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION   50kva Temporary Power Substation
50kva Transformer, 480v to 120/240v, with 200 amp load center protecting 12-20 amp, 120v, GFCI Duplex receptacles plus 6-50 amp, 125/250v, California Style Connectors. This unit can be rented on skid base and trailer mounted to transport by truck to on site applications.

Temp Power Station
Perfect for project work areas were California Style connectors are needed to feed down line Spider Boxes/Turtles GFCI power boxes.

120v GFCI Requirements
Welding areas for grinders, carpentry work for air compressors, and electrical assembly areas.

Model# RNT: TPD-TDS50/18C/480V-120V CR/GFCI
Produces a combination of both 120v GFCI power tool outlets and 125/250v California Down Line Power requirements.

Click Spec Sheet for full photo and description


  • 25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION.  RNT: TPD-TDS25/10C/480V-120V GFCI: 25KVA Transformer, 480v to 120v, 10-20amp, GFCI duplex outlets, Skid Mounted
25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION. RNT: TPD-TDS25/10C/480V-120V GFCI: 25KVA Transformer, 480v to 120v, 10-20amp, GFCI duplex outlets, Skid Mounted

Rental Rates

25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION    25kva Temporary Power Substation
25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION.   25kva Transformer, 480v to 120/240v, with 125 amp load center protecting 8-10 amp, 120v, GFCI Duplex receptacles. This unit can be rented on skid base or 12″ wheels can be added for moving on concrete surface applications.

Temp Power Station
Perfect for project work areas were multiple 20 amp, 120v, GFCI duplex outlets are required.

120v GFCI Requirements
Welding areas for grinders and electrical assembly areas.

Model# RNT: TPD-TDS25/10C/480V-120V GFCI
Produces 120v, 20 amp GFCI for power tool outlets and portable lighting requirements.

25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION. This unit is designed for rental applications. Temporary Power Station 480v- 120/240v sized to be easily position on job-site.
25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION is Perfect for welding working areas, carpentry work, piping connections, electrical assembly areas, and lunch/break areas for personnel.

Bossltg is a UL Certified Temporary Job-site Electrical Distribution Assembler.  We are registered with Underwriter’s Lab as a 3rd party certification facility for Bossltg product that include explosion proof portable lighting product.  Clients can call Boss for UL Standard information that will apply to portable rental applications. 25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION

Bossltg builds Temp Power distribution products using up to 113.5kva Transformers with 1200 amp switch gear.  We can assemble to meet engineered electrical temp power portable requirements.  Boss assembles Square D  I-Line panels up to 1200 amp, 480 volt and can UL certify with tracking serialized name plates.  Applications include Welding machine portable power outlet panels, transformer substations, office and work trailer complex electrical power utility hook-up stations, Splitter panels,  HVAC power stations, all to meet UL1640 portable standards. 10KVA TEMPORARY JOB-SITE DISTRIBUTION is one of the smallest that Boss assembles for special application used for trade shows and temporary housing requirements.  These temp power stations can be assembled on skid bases, rolling carts, and towable trailers.  We offer accessories that include light tower packages with LED floodlights, stainless steel assemblies for offshore saltwater apps, and Explosion Proof / Division 2 rated systems all UL1640 Certified.

25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION
Temp Power Station
xes/Turtles GFCI power boxes.

120v GFCI Requirements
Welding areas for grinders, carpentry work for air compressors, and electrical assembly areas.

 

Click Spec Sheet for full photo and description


  • GFI INLINE CIRCUIT PROTECTION PRODUCT DUAL 120V OUTLETS. RNT: GF-2: GFI In-line Circuit Protection Product: 120v, 20amp
GFI INLINE CIRCUIT PROTECTION PRODUCT DUAL 120V OUTLETS. RNT: GF-2: GFI In-line Circuit Protection Product: 120v, 20amp

Rental Rates

GFI INLINE CIRCUIT PROTECTION PRODUCT DUAL 120V OUTLETS

2×20 amp, 120v GFCI Portable Product
GFI INLINE CIRCUIT PROTECTION PRODUCT DUAL 120V OUTLETS 2×20 amp, 120v duplex outlets protected by an in-line GFCI protection device. 3′ power cord to dual duplex outlet box. Rated for outdoor use, industrial.

RNT: GF2:
Ground fault protection devise used for portable lighting, only. 20a, 120v GFCI for lighting loads.

NOTE
Not for use with electric power tools. OSHA requires that all 120v industrial circuits be protected with GFI devices. This product or similar products must be use for portable lighting products only.  If customer uses for electric power tools the device is current limited to 20 amps.  It has been experience when using GFI devices with rotating tools any lock rotor condition can damage the GFI protective device.

DISCLAIMER
This GFI product presentation is rated for outdoor weather proof areas.  Not to be used in any Classified area.  General purpose portable lighting loads only.  If used with electric power tools the warranty of this product will be voided if used with table saws, skill saws, or electric drills over 3/8″ sized.

Boss is a UL Certified electrical power distribution assembler and has the validations to repair Boss products back to the Boss original products OEM standards.  Boss performs a number of performance tests on each produced or repair product required by Underwriter’ Lab Agency.  Electrical connections, wire pull, static weight, environmental water testing and post inspections.  All repaired products are labelled as inspected by Bossltg.

NOTE:  GFI protects only the person that comes in contact with damaged wiring or mechanical phase to ground issues of product.  GFI does not act as a circuit protection device for equipment.  The Circuit Breaker that is wired into the operating electrical circuit protects the device.

Click Spec Sheet for photo and specifications


Request a Quote
Request a Quote - PORTABLE SPIDER ELECTRICAL GROUND FAULT BOX. 6 x 120v GFCI duplex outlets

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - PORTABLE 75KVA DISTRIBUTION-SUBSTATION 480V 125V-250 VOLT WP CONNECTORS. 8 – 125/250v 50amp Twist Lock connectors

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - PORTABLE LIGHT-TOWERS GFCI 480V-120V SUBSTATION. 25kva Transformer 4 x 1000w Floodlights

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - PORTABLE WELDING MACHINE POWER PANELS 480V. Model# WP400/8C/480-120V

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - PORTABLE SPLITTER PANELS 480V – 60AMP-100AMP PIN SLEEVE . 480v or 208y/120v, Camloc / Pin & Sleeve Connectors

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - 10KVA TEMPORARY JOB-SITE DISTRIBUTION. UL1640 CERTIFIED- TDS10/10C/480-120V/240V 10kva Transformer, 480v to 120v GFCI -240v Twistlock. Rental Rate: $650.00 per month, Request Quote for Discount

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - 50KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION.RNT: TPD-TDS50/18C/480V-120V CR-GFCI: 50kva Transformer, 480v to 120v, GFCI duplex & California Style Outlets, Skid or Trailer Mounted

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - 25KVA TEMPORARY ELECTRICAL DISTRIBUTION SUBSTATION. RNT: TPD-TDS25/10C/480V-120V GFCI: 25KVA Transformer, 480v to 120v, 10-20amp, GFCI duplex outlets, Skid Mounted

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request a Quote - GFI INLINE CIRCUIT PROTECTION PRODUCT DUAL 120V OUTLETS. RNT: GF-2: GFI In-line Circuit Protection Product: 120v, 20amp

Type of User *

Contractor

Industrial

Re-Rent Dealer

Projected Length of Rental *

Request PDF Catalog
Catalogs are currently being updated. Please contact our sales department for information.