CONSTRUCTION SITE 30 FOOT LIGHT POLES. 30′ Galvanized telescoping tower with 3 – 1500w Metal Halide Floodlights. Tower is attached to a concrete or water filled base frame that will support the 30′ tower in winds exceeding 60 mph. The base frame will have mounted an electrical control panel consisting of Main on/off fused disconnect switch, 480v, 3ph with rated fuses. Floodlight ballast enclosure mounted to switch frame. Each ballast will be fused protected and come with a green ballast on indicating light for identifying lighting circuits. Once tower light frame is assembled the base frame will have forklift pockets for positioning around project site. Base frame will have four leveling jacks with level indicators to ensure tower leveling. Tandem tower electrical connection system is available upon request. Consult factory to determine how many towers can be operated off single 480v line circuit.
The CONSTRUCTION SITE 30 FOOT LIGHT POLES will come with four pieces: Base frame, 30′ telescoping tower, lighting cross bar and pallet of three 1500w metal halide floodlights. The floodlights will be attached to the lighting cross bar. Cross bar will be bolted to top of telescoping tower. A small picker will raise tower to position onto the base frame to be bolted in place. Electrical light cord will be plugged into ballast control box. A forklift will be able to move tower throughout project site for positioning. Electricians will make electrical connections.
The telescoping tower will have a high wind speed monitor that will automatically lower tower if wind speeds exceed 45 mph to nesting position. Tower will have a red beacon light that will flash when tower is in motion to alert site operators that telescoping tower is in use.