Select Page

Portable Welding Machine Power Panels 480V

SKU: WP400/8C/480-120v Categories: ,



Our PORTABLE WELDING MACHINE POWER PANELS 480V are assembled to UL1640 and NEC National wiring Standards.  This welding panel has eight 60a or 100 amp pin & sleeve receptacles mounted on a Nema 4/12 enclosure wired to rated 480v 3p Circuit breakers installed within a 400 amp load center, Main Circuit Breaker protected.   The Load Center is rated Nema 3R for outdoor use.  System has a GREEN 480v pilot light to advise operators on site that power is live at panel.  400a Camloc feed line voltage.

The Boss PORTABLE WELDING MACHINE POWER PANELS 480V Load Center is attached to a steel skid frame.  Balance to where the system can be moved around by forklift or by dual lifting eyes.

480 volt Welding Panels are painted Safety Red.

For this product PORTABLE WELDING MACHINE POWER PANELS 480V can supply Square D I-line Gear or General Electric Gear depending on clients preferred Brand.  Stab on or bolt on breakers clients choice. Wiring devices can be supplied using Appleton, Killark, Crouse Hinds, or Hubbell.

With advance notice Bossltr can assemble special required welding panels to meet clients specific need.  We ask that you give us 14 day notice on any special built projects.


Bossltr can assembler WELDING PANEL substations using only 480 volt line power.  We can add welding switchgear with fused disconnects or individual single breaker wiring outlets.  We can supply both 480v, 3ph or 208y/120v, 3ph substations with transformers to allow for a bank of 120v or 240v GFCI receptions sized to transformer load capacities, or, we can use GFI breakers with WR duplex outlets as many has client request.

Boss is a UL1640 Certified Temporary Job-site Electrical Distribution Assembler.  The products we assemble are accepted by all Federal Construction Projects monitored by OHSA.  Our units are serialized so that on-site inspectors can validate Boss products directly with Underwriter’s on-line validation  services.